Also when calibrated in diview after some time i lose 2.5-3 % of turn (steering goes to the right for 3% ) Uploaded firmware to arduino and calibrazed in diview EDIT: Seems this is the problem. Please HELP! When z toggle is off wheel should be turning at all but sometimes its behaving like it is ...
i mean calibrate using windows standard program..not wheel config,and yes if your encoder have index channel..just calibrate once in wheel config.. https://s.kaskus.id/images/2017/01/24/6567991_20170124080553.PNGWINDOWS+R run joy.cpl if windows calibrator and DIVIEW still does not help, there may b
So once you calibrate wheel in wheelconfig you close it and after you unplug usb and connect again you dont need to calibrate it again?
It works on laptop but not on desktop (same windows)!! Encoder gives signals on both (tested with arduino encoder reading) so what is the problem? On desktop it reads only when turned to right but it doesnt recognize when turn left,but on laptop (nothing changed) all works great!!! HELP!!! :/
Guys help him plss :ngakaks Umm.. have you tried to uninstall everything (Arduino drivers, etc) on your desktop and start it from beginning? Yes I have reinstalled all but ist the same,only spins to right but when turn left its not moving. It works on all laptops i have but it wont on desktop (
Guys, arduino leonardo with incremental encoder doesnt work on desktop but works perfect on laptop (same windows 7) with arduino leonardo drivers installed,but when connected to desktop only when turn right it spin but when turn left nothing happens (it works fine on laptop) I did calibrated and ...
I dont know what is going on. Now I MUST disconnect wire which is on rx (digital pin 0) to software recognize firmware, why? I tried flashing hex file again disconnected and all but it wont recognize when is connected (pin 0) . I cant handle this anymore..
https://s.kaskus.id/images/2016/12/28/8232904_201612280149460985.jpg 1. Connect arduino 2. Open xloader 3. Click reset button on arduino 4. Select new Com port after clicking reset (its not anymore the one it was before reset 5 click upload STILL NEED FIX FOR WINDOWS 10
Oh... 1. Close wheel config 2. Unplug jumper cable from pin 6 3. Open wheelconfig 4. Wait a few second until wheel config detect the leonardo 5. Click calibrate and then wheel config searching index, turn left/right from encoder 6. If u found leonardo has connected plug ur cable jumper to pin 6 an
Only wheelconfig software can't opened right? last way from me is Windows Update, i hope this way can help ur problem. Maybe another members can help u :D OOT : why I used to skive off lessons english :( Wheel config works but encoder doesnt work,when turning wheel ,nothing happens
I think wheel config must run with compatibility mode and select with windows 7, sometimes old software doesn't support for win 10 Btw sorry for my english :D Tried to run as administrator, as windows 7 compatibility mode, windows xp mode,tried turn of antivirus, firewall,windows defender NOTH
Works great on laptop , windows 7 But when i connect it to windows 10 pc it doesnt work,recognized by windows (check image,different than on win 7(on win7 is keyboard but here on win 10 is gamepad) and it doesnt work even downloaded wheel config and its like encoder isnt even connected, But when ...
Hi Finnaly I received incremental encoder but having problems, when connected it doesnt work on it says 5-24v is maybe this problem? (When i set x axis in wheel config enc(0,1) and go to see in devices and printers is x axis working it doesnt (nothing is moving)
Again, You dont need apologize for English. Its understandable very well! Its seems I found problem, when only 1 pot is connected but pins are assigned (for y,y,rx) it controls all,but if another is added it doesnt. At least we will see :) One question for H shifter, do lever need to be short ci...
No need for explaining question above,I found how it works(h shifter)! I have tried one gamepad analog connected to 5v,GND and A0 pin and when i move it (check image) 2 axis moves not just 1 A0 as selected,why? Also d10 and d11 (for ffb) are missing why? (i dont need them)
Yes it helps! Thanks. After I pressed "reset" it was moved from PORT 8 to PORT 9 and I needed fast change selection from 8 to 9 and click upload. Now it is uploaded but I cant test it because encoder and pots didn't arrived :( Can i test just the buttons in ets2 (just buttons connected...
Guys I have a problem when trying to upload hex with xloader, it says "upload fail" or it freezes and stays "uploading" forever. I selected right port ,device name and file. Upload works fine with arduino program but i cant upload this wheel hex via arduino. What to do?
I will find some switch or i can use 2 wires without switch? EDIT: I just need short circuit it or add button if neccesery
