KOMUNITAS
Home / FORUM / All / Tech / ... / Internet Service & Networking /
[ASK]About Juniper Network
KASKUS
51
244
https://www.kaskus.co.id/thread/000000000000000001053797/askabout-juniper-network

[ASK]About Juniper Network

Tampilkan isi Thread
Halaman 20 dari 80
belajar JUNI sekaligus belajar Vyatta nyambung banget kek nya. command dan perintah2 nya sama emoticon-Big Grin
Quote:


masa sih??
Quote:


Virtual System kalo ga' salah ada pada seri ISG1000/2000, NS5200/5400 karena memang segmentasinya lebih ditujukan ke High End Enterprise atau Service Provider...........berbeda dengan FortiGate yang mulai dari tipe FG60 sampai FG620B semuanya sudah termasuk 10 VDOM...kalau di Juniper harus beli license Virtual Sytem-nya lagi..............
Quote:


iya yah mirip2 hehehe... barusan juga liat, ada simulatornya juga yah???
Quote:


ngapain pake simulator . langsung install aja vyatta free routerOS, ato kalo ga mau di install jadi livecd juga bisa
Quote:


Ada benarnya juga bos btw vytta itu pake XORP routing enginnya
gw dulu sebelum pegang OLIVE pegang XORP dulu abis kepaksa pake XORP buat multicast IPv6 router untuk skripsi gw. karena ga ada sopwer lain selain XORP yang bisa multicast
trus karena uda terbiasa pake XORP pegang Juni uda ga gitu kaget meskipun XORP ama Juni lebih kompleks an Juni confignya
Sekarang pegang XORP lagi rada2 kagok gitu bos abis kebanyakan maen Juni emoticon-Hammer
Quote:



nyobain dulu gan emoticon-Angkat Beer
Quote:


yup betul sekali....

Quote:


hahaha....kyk nya klo liat cartoon nya bikin nyengir2 yah bos ??
up up up...

|CoreSW|====(Trunk)====|Netscreen|=====|router|=====Internet

barusan gw mau config seperti topologi diatas,

di core ada 3 VLAN

gw mau konfig di netscreen dengan 3 subinterface vlan

karena gw mau bikin 3 Zone, DMZ, LAN1 dan LAN2

kira-kira commandnya gini bukan yah..



set interface "ethernet0/1.1" tag 100 zone "LAN1"

set interface "ethernet0/1.1" ip 10.10.1.1/24

set interface "ethernet0/1.1 route

set interface "ethernet0/1.2 tag 101 zone "LAN2"

set interface "ethernet0/1.2 ip 10.10.2.1/24

set interface "ethernet0/1.2 route

set interface "ethernet0/1.3 tag 101 zone "DMZ"

set interface "ethernet0/1.3 ip 10.10.3.1/24

set interface "ethernet0/1.3 route

kira-kira gini yah....

terus buat yang ethernet0/1nya perlu masukin ke zone gak??
Quote:


gak usah, eth0/1 nya NULL aja...
Quote:


begadang bos ? emoticon-Big Grin
Quote:


kagak seh...lagi iseng install 3g modem..sekalian ngetes hehe
Quote:



ooo, pake apa providernya?
Quote:


pake yg katanya skrng lagi kelebihan beban bro...klo loe pake apa ????
gua belum cobain ini barang emoticon-Big Grin emoticon-Big Grin emoticon-Big Grin

cuman gua bantu kasih link nya aja deh

semoga membantu.


[url]http://rapid*share.com/files/69216031/Simulator.part1.rar[/url]
[url]http://rapid*share.com/files/69216785/Simulator.part2.rar[/url]
[url]http://rapid*share.com/files/69217548/Simulator.part3.rar[/url]
[url]http://rapid*share.com/files/69218331/Simulator.part4.rar[/url]
[url]http://rapid*share.com/files/69219004/Simulator.part5.rar[/url]


Routersim - Ccna Certsim Full Latest Version

RouterSim's CCNA Network Visualizer 5.0 | 74 MB
It's a CCNA™ router and network simulator that offers more features and flexibility than any product on the market.

RouterSim's CCNA™ Network Visualizer® 5.0 is a CCNA™ router and network simulator that offers more features and flexibility than any product on the market. You can design, build and configure your own network with drag and drop design.You also have access to a valuable feature in Net Assessment.
With a program that offers over 470 commands and over 220 supported labs, you are empowered to build, test and preview any kind of network and environment you want! CCNA™ Network Visualizer® 5.0 is tailor-made for:
The individual studying for the Cisco® CCNA™ 640-801 exam
Corporate trainers and employees
Instructors
Students at Cisco® Networking Academies
Students at colleges, universities, and technical institutes
Over 220 supported labs match up well with Todd Lammle’s best selling Sybex CCNA Study Guide and the Cisco Networking Academy Program CCNA 1 and 2 Lab Companion.



GNS-3
July 24, 2007 at 10:53 pm · Filed under Simulator

GNS-3 is a graphical network simulator that allows you to design complex network topologies. You may run simulations, or configure each device, from a simple workstation to a powerful Cisco router.

To allows complete simulations, GNS-3 is based on two existing projects:

NS-3 , a discrete-event network simulator for Internet systems, targeted primarily for research and educational use.
Dynamips, an IOS emulator which allows users to run IOS binary images from Cisco Systems.
GNS-3 is an open source product that may be used on multiple platforms, including Windows, Linux, and MacOS X.

Features overview
In the current version (alpha release) which is still under heavy development, GNS-3 works only with Dynamips. The ns-3 simulation mode has not been implemented yet.

Currently supported features:

Design of high quality network topologies.
Emulation of Cisco routers.
Load-balancing on multiple hosts/hypervisors when in emulation mode.
Topology import and export.
Image exports (PNG, JPEG, BMP, XPM).


Dynamipsgui 2.7

SemSim v.2.2.1: Cisco CCNA Exam Router Simulator (With Keygen)

SemSim is internationally acclaimed Cisco CCNA exam router simulation software that helps aspiring candidates prepare for the Cisco Certified Network Associate certification exam. Not only does it provide an understanding of networking concepts – through router simulation based virtual labs and practice tests, but also recreates an environment for real-life network configuration practice. It opens new vistas in personal flexibility and time management. SemSim provides you with a classroom quality-learning environment at an affordable price. Start a successful career as a Cisco certified network professional with SemSim now ! We even offer an online free CCNA Study center to provide some helpful articles on basic exam information.
Save Time, Save Money, Prepare Better
- with SemSim Router Simulator, your choice to make for success in the exam
Save Time

SemSim offers you valuable time savings in your preparation for Cisco certification exam, without compromising on the quality of preparation. With Sem-Sim you will get the following time management advantages:

* Do your practicals at your convenience.
* Practice as often as you want.
* No need to enroll at a training lab and wait your turn.
* Save time on the certification exam:
* Simulation questions typically consume the most time on the exam. However with SemSim simulator, exhaustive practice with mock exam simulation questions will ensure that you save time on the exam. This will provide you with better time management to ensure that you have sufficient time to answer the multiple choice/theory questions.

Save Time

SemSim offers you valuable time savings in your preparation for Cisco certification exam, without compromising on the quality of preparation. With Sem-Sim you will get the following time management advantages:

Do your practicals at your convenience.
Practice as often as you want.
No need to enroll at a training lab and wait your turn.
Save time on the certification exam:
Simulation questions typically consume the most time on the exam. However with SemSim simulator, exhaustive practice with mock exam simulation questions will ensure that you save time on the exam. This will provide you with better time management to ensure that you have sufficient time to answer the multiple choice/theory questions.





Tutorial: Basic IOS command line interface
Tutorial: Configure OSPF routing protocol
Tutorial: Configure a default route
Tutorial: Configure a serial line
Tutorial: Configure Standard Access List on Firewall Routers
Tutorial: Configure Extended Access List on Firewall Routers
Tutorial: Configure RIP routing protocol
Tutorial: Configure BGP routing protocol
Tutorial: Configure EIGRP routing protocol
Tutorial: Configure eBGP mode BGP routing
Tutorial: Configure OSPF multiple-area routing
Tutorial: Configure Frame Relay
Tutorial: Configure NAT
Tutorial: Configure VLAN
Quiz: Neighbor device information
and many more ...
Quote:


loh ini modul cisco yah... emoticon-Big Grin
Quote:


mdh2an cm khilaf emoticon-Big Grinemoticon-Big Grinemoticon-Big Grin
Quote:


gw pake flash bro, tapi biar makin ngacir gw pasang mesin proxy dengan enable compression di kantor trus gw konek VPN ke mesin kantor

hasilnya quota jadi lebih hemat soalnye data dari gw ke kantor di compress plus hayudd

emoticon-Peace
Quote:


wahh curang neh....
kata orang biar gak di bilang curang...share donk ...ip proxy nya apa bang.. emoticon-Big Grin emoticon-Big Grin :maho
Quote:


andai gw bisa share.. gw pasti share ke elo bos emoticon-Peace


everything is logged emoticon-Hammer
Halaman 20 dari 80


×
© 2022 KASKUS, PT Darta Media Indonesia. All rights reserved
Ikuti KASKUS di